You can replace two tires on a Chevy when the owner’s manual allows it and the other pair still meets the vehicle’s tire requirements. When the manual allows two new tires, putting the deeper-tread pair on the rear axle helps the Chevy stay stable in rain on US 22 through Allentown. An all-wheel-drive Chevy may need four if the new pair would roll a different distance per revolution from the tires it keeps.
By Outten Chevrolet of Allentown
Key Numbers
- Measure the tread on all 4 tires against the vehicle maker’s requirements.
- Put the 2 new tires on the rear axle when the manual permits pair replacement.
- NHTSA says to replace tires worn to 2/32 inch.
- A tread puncture up to 1/4 inch may qualify for repair after the tire is inspected inside.
Where should the two new tires go?
Install the matched pair on the rear axle when the vehicle manufacturer permits two-tire replacement and gives no other direction. Newer tread on the rear can clear more water and help keep the back of the vehicle from sliding outward. When the front tires are worn on a front-drive Chevy, ask if the remaining rear pair can move to the front. First confirm the tires can change positions. Some vehicles use different front and rear sizes or have directional tires. If two match the vehicle and the current rears are sound, ask the shop to mark the new positions before it mounts the tires.
Chevy rear tire placement
Ask for the position of each replacement on the work order. If you drive from Bethlehem to Allentown in the rain, tire pressure and actual tread depth still matter after the pair is installed. Use the Allentown tire finder to match a tire to your vehicle before ordering.
When does an AWD Chevy need four tires?
Replace all four when the AWD tire requirements call for a matched set or the remaining tires leave the vehicle outside its permitted difference. Two tires with the same printed size can have different rolling diameters when one set has deeper tread or a different construction. Sustained speed differences can load the drivetrain. Ask the shop to read the manufacturer’s instructions for the year and drivetrain before you replace a flat on an AWD Chevy in Whitehall or Emmaus.
Chevy tread-depth difference
If one pair measures 4/32 inch and a new pair measures 10/32, the tread-depth difference is 6/32 inch. Compare that 6/32-inch difference with the vehicle maker’s requirements before buying. Have the shop check tire model, size and rolling diameter too.
What should I measure before replacing two tires?
Measure tread depth at the inner, center and outer main grooves on each tire and check the sidewalls for damage. A worn inner shoulder can bring the replacement date forward even if a tire looks fine when you stand beside it. Ask for the lowest reading at each position and check the cold pressures against the driver’s door label. For a repeat pull between Emmaus and Allentown, add an inspection of the steering and suspension before assuming a tire purchase will stop the wear.
Chevy treadwear bars
NHTSA recommends replacement at 2/32 inch. When the tread is level with its wear bars, the remaining groove has reached that point. The Chevrolet Trailblazer maintenance guide covers the factory rotation schedule for that model. Follow the schedule in the manual for the Chevy you own.
Can a punctured tire be repaired instead?
A puncture no more than one-quarter inch across in the repairable tread area may qualify after the shop removes the tire to inspect its inside. Evidence of damage from driving on it flat can rule out repair. A puncture at the shoulder or sidewall falls outside the industry repair area. A screw picked up near the Allentown Fairgrounds may leave a repairable hole in the tread, and an inspection inside the tire can reveal damage from driving on it flat.
Chevy puncture repair inspection
A permanent repair uses a stem to fill the injury and a patch to seal the inner liner. Ask the Chevrolet service department to check the inside for damage before applying a repair. If a tire is flat or visibly damaged, follow the vehicle manual or use roadside help.
What should a quote for two new tires include?
Ask for the tire size, load index, speed rating and model, plus mounting, balancing and any separate charges. On W Tilghman St, Outten Chevrolet of Allentown can match the vehicle and put the remaining tread readings on the work order. For a Chevy from Easton or Bethlehem, have the shop write down whether the positions should change at installation. Take the model and year to the tire service appointment page.
Chevy tire quote line items
Visit service and parts specials to see which tire packages apply. A two-tire quote should tell you whether there are separate fees for disposal or sensor work. A four-tire quote needs the same line items to compare the installed totals.
Chevy tire placard details
If the current sidewall and door label disagree, have the shop confirm the original tire size and ratings before ordering. Find the location and hours through the dealership contact page.
Chevy Tire Replacement FAQs
Do two new tires always go on the front of a front-drive Chevy?
When replacing two is permitted and the vehicle instructions don’t say otherwise, place the deeper-tread pair on the rear. That helps preserve wet-road rear traction.
Is two tires always wrong on AWD?
Check the owner’s manual for the drivetrain and have all four positions measured. Some vehicle makers advise against replacing fewer than four.
Does the same printed size guarantee a match?
No. Tread depth, construction and tire model matter. Use the size, load rating and construction that the vehicle manufacturer specifies.
Can the warning light tell me that the tread is worn?
The tire pressure warning detects low pressure. Measure tread separately on all four wheels, including the inner shoulders.
When is a puncture too large to repair?
The industry guideline permits a puncture up to a quarter inch in the repairable tread area if it passes the inside inspection.